The FRAMECAD® System’s technologically advanced manufacturing solutions use our intelligent software to rapidly produce lightweight steel framing. FRAMECAD manufacturing systems are made in New Zealand and use quality New Zealand and European componentry from reliable suppliers.
The PEB300 produces frames for portal buildings and purlins. It is an ideal manufacturing system for construction of PEB buildings such as warehouses and commercial projects.
The P325iT can produce wall frames and trusses for pods, modular and residential structures quickly and economically.
The J325iT can produce web joists for use in residential and commercial applications and manufacture the members for
a webbed joist 40% faster than a standard F325iT which is significantly quicker than other equipment on the market.
The F325iT is a highly versatile member of the FRAMECAD® manufacturing system. It has been designed to offer increased production speed, greater flexibility and increased reliability. The F325iT roll forming machine is best suited for Residential and Light Commercial projects. The F325iT can produce profiles from 63mm (2.5") to 150mm (6") in steel up to 1.15mm (18g) BMT thickness.
The F450iT is a fast, efficient solution for producing the framing and trusses required for heavy residential and light commercial buildings. The F450iT has been designed especially for producing from 1 to 6 storey construction. The F450iT can produce profiles from 75mm – 150mm.
The FRAMECAD® TF550H provides heavy duty manufacturing solutions for high volume production. It has been designed to produce heavy duty framing profile best suited for all frames, roof trusses, floor joists and roof and floor panels where extra strength in construction is required.
The TM300iT has been specially developed as part of the FRAMECAD® optimized truss manufacturing system. It produces 75mm standard size C-section trusses designed specifically for maximum strength at minimum cost.
The FL650 has been specially developed as part of the FRAMECAD® optimized Flooring System. Suitable for large scale multi-level, residential or commercial buildings, this roll-former produces dedicated C & U profiles between 254mm (10”) and 300mm (12”) in steel up to 2.25mm (12g) BMT thickness.
Widen your manufacturing and constructing portfolio with the FRAMECAD® FB150i Batten (Purlin) machine. A dual profile, dedicated roof batten roll-forming machine, the FB150i is designed for high speed roof batten production.
The ST800iT is a multi-profile system that offers full framing capabilities and is ideal for residential and light commercial construction. The ST800iT has four profiles, three flange heights and six frame and truss tools, providing a wider range of framing options. The ST800iT can produce profiles between 89-203mm, with a gauge range of 0.76-1.50mm .
A multi-profile solution for flooring and framing construction, and the ideal solution for producing light gauge steel framing and flooring profiles with sizes between 92mm and 305mm.
The FRAMECAD® ST series offers a multi profile, heavy duty construction roll-forming system to fulfill the requirements of large scale, multi-purpose projects. It produces an infinite range of section sizes from 50mm (2”) - 300mm (12”) within a steel gauge range of 0.55mm to 1.95mm (24g to 14g) BMT thickness.
The FRAMECAD® Mobile Factory is a completely secure, self-contained steel frame roll-forming production facility that can be located anywhere needed, especially in remote areas with little or no infrastructure.
©2016 FRAMECAD® Limited FRAMECAD®, the FRAMECAD® logo, FRAMEMASTER and the FRAMEMASTER logo are all trade marks of FRAMECAD® Limited.